SPECIAL PRODUCT FOR OUTSIDE CLAY TILES, STONE, SLATE, SANDSTONE, TOSCA AND POROUS SURFACES IN GENERAL - SATIN FINISH - ready for use - QUICK DRYING - EXTERNAL USE ONLY
ENHANCES, PROTECTS, WATERTIGHT.
PROPERTIES: It is a new manufactured from different components to water, non-polluting, non-flammable, odorless, good weather resistance, rub, use, water, and easily applied by brush, fine foam roller or gun. Does not flake or skins.
When applied prevents the penetration of water and create mold also gives consistency and setting the surface preventing wear thereof and the joints.
HOW TO USE: Let dry work 30 days in summer and 60 days in winter, if enough tile adhesive 5 days.
1.º- use only mud floors and new surfaces have not applied any product on our Morafond Cleaning clean, rinse thoroughly with water, let dry for 5-8 days in summer and 10-12 days in winter as room temperature . 2.º- Apply a first layer of abundant and well distributed MORAKRON and allow to dry for 3-4 hours. Take good care in the first layer that the product is well covered and distributed. In pavements lot 3.º- a second light absorption layer is applied. Clean tools with water as quickly as possible.
In areas with less absorption as slate, etc, apply a layer evenly distributed and if necessary apply a 2 nd.
||With one liter 3 m2 to 5 m2 in manual and mechanical pavement pavements.
||1 liter, 5 liters, 20 liters, 220 liters and 1000 liters.
NOTE: Do not apply at temperatures below +6 ° C. Once finished can be walked at 12 hours. Over time and is impaired, a layer can be applied without stripping the previous layers. To resist stains must be covered with the necessary layers. At work inside and finished with excellent decor and years of resistance, use our Oil Mora Cerámicasâ, matte leather or rustic old brightness according to taste.
NOT APPLY TO AREAS THAT HAVE NO absorption (RASILLA, GRES, ETC.)
* ZERO VOC s
STANDARDS: UNE 23727-90 Reaction to fire M-1 to M-0 support. (Non-flammable)
The information provided in this sheet is the result of our laboratory research and practical experience of application. However and because often the products are used in conditions beyond our control, we can not guarantee anything but the success of the product as long as their application and use are correct.